Tenacity

I was listening to a Digital Fabrication Residency talk by Laura Splan about her biologically-inspired bodies of work incorporating digital technologies such as machine embroidery, laser cutting, 3D-printing etc. She used the word tenacity to describe that state of exciting and anxious exploration of what the tools can do on a deadline. “Failure isn’t an option but it’s also an expectation.” This statement gongs through my head as I tediously adjust my 52 Inkscape vector drawings for probably twentieth time. She also says to pace yourself, know at what point you have to accept what you can accomplish and when you have make compromises with your original vision. Not bad advice in any endeavor ; – )

Here are some interim points along my own project path. The vision is two artist books, Siamese-twinned at the spines, one small (5″ x 12″) and one large (16″ x 12″). The pages and covers will eventually cut from clear acrylic, though right now I am working with a test run on cardboard. LED lights in the conjoined spine will fluoresce light out to the edges of the acrylic sheets. The object(s) will either sit on a table as separate books or be wall-mounted vertically together.

The vision has taken me into some familiar territory: using vector software to interpolate one shape to another over a series of steps so that the “slices” or “pages” describe an overall volume. (I enjoy the multiple meanings of “volume” –dimensional form and particular book.) Those shapes are then laser cut.

Photo of Laser-cut cardboard dummy of the smaller book

Laser-cut cardboard dummy of the smaller book.

Photo of laser-cut cardboard book dummy

Laser-cut cardboard dummy of the larger book.

 

 

 

 

 

 

 

 

 

 

Photo of linen thread and cardboard test pages

Here I’m testing my binding method on a cardboard dummy of the small book’s shaped pages.

 

 

 

 

 

 

 

 

But some of the skills are outside my comfort zone. I’ve learned not only to design and animate, but also program the firmware on my BlinkyTape strip of 60 LEDs. I had some help soldering on an additional 60 LEDs (thanks Mark!). After traveling down many dead-ends it was a moment of great triumph when they all lit up in the pattern I had created. (Thanks, Maarten and Mets!)

Photo of BlinkyTape soldered to NeoPixel LED strip

This image shows two strips of LEDs soldered together and running a subtle animation of blue-to-green-to-lighter blue and back again.

 

 

 

 

 

 

 

 

 

 

I have created the design for a cast acrylic part to hold the LEDs in the spine in Fusion360 but don’t dare get it printed or milled until the book is bound and I know its exact measurements. (Thanks, Erik and Kari!)

A recent rendering of the custom part for holding the LEDs butting the pages up them.

A recent rendering of the custom part for holding the LEDs and butting the pages up them.

 

 

 

 

 

 

 

 

It feels as if the project will never get finished. So many pieces to fit together, so much time spent learning. One step forward for every two steps back… And what if it isn’t cool?!? Not only does it take tenacity and persistence, but faith that the end result will be worth seeing.

Advertisements

One comment on “Tenacity

  1. KATHERINE K BARBER says:

    Wow, Suze. You are amazing!

    Kate

    Sent from my iPad

    “There is more than one way to do everything.”

    >

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s